Briggs and Stratton Engine Parts

suitable for 4 Stroke Engines as fitted to Lawn Mowers, Rotovators, Tillers, Water Pumps, Stationary Engines, Generators, Pressure Washers, Wacker Plates, Compactors, Cement Mixers and much more,

BULK BUY SAVINGS AVAILABLE, THE MORE YOU BUY THE MORE YOU SAVE !

Complies with SI 1982/630. Dimensions:  Length = 330mm,  Height = 305mm, Width = 163mm, 

Dimensions: Height = 394mm, Width = 300mm, Depth = 127mm,

suitable for 4 Stroke Engines as fitted to Lawn Mowers, Rotovators, Tillers, Water Pumps, Stationary Engines, Generators, Pressure Washers, Wacker Plates, Compactors, Cement Mixers and much more,

Dimensions:  Height = 462mm, Width = 365mm, Depth = 155mm,

Complies with SI 1982/630. Dimensions: Length = 400mm, Height = 345mm, Width = 210mm,

suitable for 4 Stroke Engines as fitted to Lawn Mowers, Rotovators, Tillers, Water Pumps, Stationary Engines, Generators, Pressure Washers, Wacker Plates, Compactors, Cement Mixers and much more,

BULK BUY SAVINGS AVAILABLE, THE MORE YOU BUY THE MORE YOU SAVE ! UNIT QUANTITY IN THE PRICING CHART IS PER 5 LITRE. SO FOR EXAMPLE IF YOU ORDER QUANTITY 4 THAT EQUALS 4 X 5 LITRES.

BULK BUY SAVINGS AVAILABLE, THE MORE YOU BUY THE MORE YOU SAVE !

Complies with SI 1982/630. Dimensions: Length = 260mm, Height = 245mm, Width = 125mm,

For Briggs and Stratton 16HP, 16.5HP, 18HP, 20HP Opposed Twin Engines with the following Model Codes: 400400 to 400499, 402400 to 402499, 402700 to 402799, 402707, 40A700 to 40A799, 40A777, 422400, 422432, 422447, 422700, 422777, 42A700, 42B700, 42D700, 42E700, 460700,  461700, 

PTO SIDE

For Briggs and Stratton Engine Model Codes: 

120H00, 120H02, 120H07, 120K00, 120K02, 120T00, 120T02, 121K00, 122H00, 122H02, 122K00, 122K02, 122T00, 122T02, 124T00, 124T02, 126M00, 126M02, 126T00, 128M00, 128T00, 129H00, 12H802, 12F800, 12F802, 12H805, 12J900, 

Product is CE Approved. Product conforms to EN-352-1: 2002, ANSI S3.19. High Quality.

Product Features: Clear lens made of Impact resistance polycarbonate. Flexible side arms for a very comfortable fit. CE Approved. Conforms to EN166: 2001. and Meet the European Directive 89./686/EEC. Top Quality Product.

Product Features: Soft flexible PVC frame surround for comfort. Polycarbonate Lens. Fully ventilated to avoid condensation build up. Wide Vision. Adjustable head strap. CE Approved. Conforms to Quality Standards EN166 B, ANSI Z87.1, High Quality.

BULK BUY SAVINGS AVAILABLE, THE MORE YOU BUY THE MORE YOU SAVE !

BULK BUY SAVINGS AVAILABLE, THE MORE YOU BUY THE MORE YOU SAVE !

Standard Bore Size. Note: Not for OHV Engines. 

For Briggs and Stratton 2hp, 2.5hp and 3hp engines with Standard Bore 2 3/8", 2.375", 60.325mm

For Briggs and Stratton 4hp engines with Standard Bore.

For Briggs and Stratton 7hp and 8hp Flat Head Engines with Standard Bore. Not for OHV Models. 

For Briggs and Stratton Classic 35, Sprint 375, Quattro 38, Quattro 40 and other 3.5hp, 3.75hp 5hp Engines with Standard Bore 2 9/16", 2.5625", 65.0875mm.

For Merry Tillers with 2hp, 2.5hp, 3hp Briggs and Stratton Engines with Standard Bore 2 3/8", 2.375", 60.325mm

For Merry Tiller 5hp Briggs and Stratton Engines with Standard Bore 2 9/16", 2.5625", 65.0875mm

Main Air Filter Dimensions: 

Length = 181.3mm, 
Height = 60.3mm, 
Width at widest point = 72.2mm, 

Main Air Filter Dimensions: 

FOR SINGLE CYLINDER ENGINES !

FOR AIR FILTER HOUSINGS THAT OPEN AND CLOSE WITH A CLIP.

NOT FOR MODELS WITH FUEL PUMPS ! 

FOR SINGLE CYLINDER 10.5HP, 11HP, 11.5HP, 12HP, 12.5HP, 13.5HP, 105 OHV SERIES 3 ENGINES ONLY !

FOR AIR FILTER HOUSINGS THAT OPEN AND CLOSE WITH A CLIP.

NOT FOR MODELS WITH FUEL PUMPS ! 

FOR SINGLE CYLINDER OHV SERIES 4, 14.5HP, 15.5HP, 16.5HP, 17.5HP, 18.5HP, 19.5HP ENGINES ONLY !

IMPORTANT NOTE: FOR THE 18HP ENGINES, THERE ARE TWO POSSIBLE KITS. THIS IS THE SMALLER OF THE TWO POSSIBLE AIR FILTERS AT 180MM OD, MAKE SURE TO CHECK YOURS !

IMPORTANT NOTE: FOR THE 18HP ENGINES, THERE ARE TWO POSSIBLE KITS. THIS IS THE LARGER OF THE TWO POSSIBLE AIR FILTERS AT 199MM OD, MAKE SURE TO CHECK YOURS !