BRAND NEW AFTERMARKET REPLACEMENT DRIVE BELT PART NO'S: MT.329,  W28093,  F016W28093 FOR MERRY TILLER ROTOVATOR MODELS:

TYPE D,

MAJOR Years 1958 to 1968 and 1978 to 1984 ,

SUPER MAJOR Years 1978 to 1984,

PROFESSIONAL Years 1961 onwards,

TITAN GT ( For low speed pulley ) Years 1978 to 1984.

TO FIND IF THIS IS THE RIGHT BELT FOR YOU JUST CHECK YOUR MEASUREMENTS AGAINST THE ABOVE DIAGRAM ON PHOTO 2.

YOUR MEASUREMENTS NEED TO BE APPROXIMATELY THE SAME AS ONE OF THESE TWO COMBINATIONS :

COMBINATION 1:
SMALL PULLEY DIAMETER = 2 INCHES

LARGE PULLEY DIAMETER = 10.5 INCHES

DISTANCE BETWEEN THE CENTRE OF THE SMALL PULLEY TO THE CENTRE OF THE LARGE PULLEY.

= 13 INCHES.
OR
COMBINATION 2

SMALL PULLEY DIAMETER = 2 INCHES

LARGE PULLEY DIAMETER = 8.5 INCHES

DISTANCE BETWEEN THE CENTRE OF THE SMALL PULLEY TO THE CENTRE OF THE LARGE PULLEY.

= 15 INCHES.